Часто задаваемые вопросы
Часто задаваемые вопросы
-
What is the typical focused spot diameter of nanosecond, picosecond and femtosecond laser equipment?
Nanosecond: Generally, the light spot is 0.5-1mm.
Picosecond: The focused spot is generally around 20μm.
Femtosecond: Under the action of a laser beam with a high repetition rate of 100-200KHz and a very short pulse width of 10ps,
the focused spot diameter is as small as 3μm. -
What are the main applications of UV laser cutting machine?
Nanosecond: Generally, the light spot is 0.5-1mm.
Picosecond: The focused spot is generally around 20μm.
Femtosecond: Under the action of a laser beam with a high repetition rate of 100-200KHz and a very short pulse width of 10ps,
the focused spot diameter is as small as 3μm. -
Precautions for laser cutting machines to process various metal materials?
Nanosecond: Generally, the light spot is 0.5-1mm.
Picosecond: The focused spot is generally around 20μm.
Femtosecond: Under the action of a laser beam with a high repetition rate of 100-200KHz and a very short pulse width of 10ps,
the focused spot diameter is as small as 3μm. -
What should be paid attention to when laser cutting stainless steel?
Nanosecond: Generally, the light spot is 0.5-1mm.
Picosecond: The focused spot is generally around 20μm.
Femtosecond: Under the action of a laser beam with a high repetition rate of 100-200KHz and a very short pulse width of 10ps,
the focused spot diameter is as small as 3μm.