News
PET film laser profile cutting machine
CY-CT series PET film laser profile cutting machine can use ultraviolet picosecond and green light picosecond to cut PET film, PI film, PP film and other film materials.
It can be processed on a single platform or on two platforms at the same time, with double production efficiency.
Features of PET film laser profile cutting machine:
Parameterized settings, unlimited increase in cutting parameters.
The processing process is clean and dust-free.
Equipped with navigation CCD to increase the visual range and facilitate target catching.
Forgot to set the origin of the drawing, and the software automatically locates the origin of the drawing.
Convenient software operation, you can move the platform directly on the displayed image file to determine the cutting range.
Dual heads and dual systems, dual operation interfaces, two beams of light from a single laser, lower maintenance costs.
Summary of advantages:
1. High precision
2. High efficiency
3. High cost performance
4. No carbonization
5. Fully automatic
6. Safety and environmental protection
-
What is the typical focused spot diameter of nanosecond, picosecond and femtosecond laser equipment?
Nanosecond: Generally, the light spot is 0.5-1mm.
Picosecond: The focused spot is generally around 20μm.
Femtosecond: Under the action of a laser beam with a high repetition rate of 100-200KHz and a very short pulse width of 10ps,
the focused spot diameter is as small as 3μm. -
What are the main applications of UV laser cutting machine?
Nanosecond: Generally, the light spot is 0.5-1mm.
Picosecond: The focused spot is generally around 20μm.
Femtosecond: Under the action of a laser beam with a high repetition rate of 100-200KHz and a very short pulse width of 10ps,
the focused spot diameter is as small as 3μm. -
Precautions for laser cutting machines to process various metal materials?
Nanosecond: Generally, the light spot is 0.5-1mm.
Picosecond: The focused spot is generally around 20μm.
Femtosecond: Under the action of a laser beam with a high repetition rate of 100-200KHz and a very short pulse width of 10ps,
the focused spot diameter is as small as 3μm. -
What should be paid attention to when laser cutting stainless steel?
Nanosecond: Generally, the light spot is 0.5-1mm.
Picosecond: The focused spot is generally around 20μm.
Femtosecond: Under the action of a laser beam with a high repetition rate of 100-200KHz and a very short pulse width of 10ps,
the focused spot diameter is as small as 3μm.